2009

Interface
Previous/Next Key Scrolls and selects through the list of twist poses.
Twist Poses List Lets you choose a preset or saved pose to apply to the biped's
selected limb. By default, five twist poses are available for each three-DOF
limb: Up, front, lateral, down, and back. You can also rename the current
twist pose.
Twist Sets the amount of twist rotation (in degrees) applied to the twist links
linked to the selected limb. The twist links from the opposite side are so
affected. Default=0. Range=–180 to 180.
NOTE Changing the Twist value automatically resets the current limb's orientation
to the active twist pose.
Bias Sets the distribution of rotation along the twist links. A setting of 1.0
concentrates the twist towards the top link while a setting of 0.0 instead
concentrates it towards the bottom link. The default setting is 0.5, distributing
the rotation evenly throughout the links. The twist links from the opposite
side are so affected.
NOTE Changing the Bias value automatically resets the current limb's orientation
to the active twist pose.
NOTE You can also set a Bias value for Two-DOF limbs.
Add Creates a new twist pose based on the selected limb's orientation and
resets Twist and Bias to their default values.
NOTE Adding a new pose for one limb automatically makes it available for the
limb on the opposite side.
Set Updates the active twist pose with the current Twist and Bias values.
Delete Removes the current twist pose.
Default Replaces all twist poses of all three-DOF limbs with five default preset
poses.
4362 | Chapter 17 character studio