2009
Lock COM Keying allows you to activate all center of mass tracks at the
same time.
3
Turn on both Body Horizontal and Body Rotation.
4 Select any other part of your biped.
The COM track controls become inactive. Note that Lock COM Keying
is storing the selected controls.
5 Reselect the biped COM either by selecting the blue octahedron near the
center of the biped's pelvis, or by clicking one of the three COM track
controls.
Lock COM Keying restores the selected controls.
To rotate the biped about a pivot that is not the COM:
This is an example that shows the biped falling over by rotating about its feet.
NOTE These steps do not work when Move All Mode is active, because
this mode always uses World coordinates.
1
Select both of the biped’s feet, and set Planted keys for them.
2 Select the biped’s COM.
3
Click Select And Rotate to turn it on (or use the quad
menu), and then choose Use Transform Coordinate Center from the Use
Center flyout.
4 From the Reference Coordinate System drop-down list, choose Pick.
Biped User Interface | 4351