2009

Procedures
To rubber band an arm or leg link:
1
On the Motion panel > Biped rollout, turn on Figure mode.
2 Select the arm or leg link you want to rubber band.
3 Turn on the Move transform.
4 On the Biped rollout > Modes group, turn on Rubber Band mode.
NOTE This button is unavailable if you are not in Figure mode, or if a part
of the biped other than the upper or lower arm or leg, or the center of mass
is selected.
NOTE The Modes group is hidden by default. To display it, click the expansion
bar on the Biped rollout.
5 Move the selected arm or leg link.
As you move the arm or leg link, the hands and feet are stationary as the
knees or elbows are positioned.
To adjust the biped center of mass with Rubber Band:
1
On the Motion panel > Biped rollout, turn on Figure mode.
2 Select the center of mass object (diamond shape) on the biped.
3 Turn on the Move transform.
4
On the Biped rollout > Modes group, turn on Rubber Band mode.
This button is unavailable if you are not in Figure mode or if a part of
the biped other than the upper or lower arm or leg or if the center of
mass is selected.
5 Move the center of mass.
While Rubber Band mode is active, the center of mass moves
independently from the rest of the biped, which remains in the same
position.
4170 | Chapter 17 character studio