2009

to move 10 units away from chassis along the suspension axis in the
direction of the icon’s arrow and 5 units in the opposite direction.
2 Change the limits and observe the difference in the simulation.
3 You can also change Friction for the Car-Wheel constraint; this inhibits
the wheel’s motion along the suspension axis.
To spin the wheel:
These controls are found in the Spin Parameters group.
1 Set the Velocity value to the required value. This is specified in radians
per second.
2 Set the Gain. This is the maximum angular impulse the constraint can
apply to maintain this angular velocity.
Constraints | 3991