2009
To limit the rotation between the attached objects:
1 With the Hinge selected, open the Properties rollout.
2 Turn on the Limited check box.
The Hinge limits display around the Parent Space axis.
The default angle limits are –90.0 and 90.0. This means that in a situation
where the sub-objects are fully aligned for the objects, the objects will be
able to rotate 90 degrees in either direction about the shared hinge axis.
The child object is free to rotate within the indicated limits relative to
the parent during the simulation.
3 Change the minimum and maximum rotations the constraint maintains
between the objects by adjusting the Min Angle and Max Angle values.
The limit display updates to reflect your changes, to help you choose
appropriate values. Upon simulation you can see that the rotation between
the objects has been limited.
Constraints | 3971