2009

Track View or by stepping through the 3ds Max animation a frame at a time
after the match.
Generate Keyframes Generates keyframes for the estimated parameters on
each frame.
Match-Move Starts the match process.
Max. Pixel Error Displays the running maximum tracking error and frame.
The error is shown in pixel fractions, and gives the largest distance between
any feature and the viewed position of its associated tracking object over all
the frames matched. You can use this to give a general estimate of how good
the match is and the frame to investigate if errors are problematic. The pixel
error display also interactively updates as you nudge tracker gizmos in Live
Camera Match mode, showing the current maximum match distance for the
camera; see
Movie Stepper Rollout on page 3835.
Note that this error might be exaggerated when you employ match point
weighting, as this tends to distribute the errors toward the nonweight points.
Show Errors Opens a text window containing a list of the maximum errors
for each of the matched frames, so you can look over the whole set of match
frames and identify which frames to check.
Camera Tracker: Move Smoothing Rollout
Utilities panel > Utilities rollout > More button > Utilities dialog > Camera
Tracker > Move Smoothing rollout
Because the match-move algorithm is not always exact and is highly susceptible
to field measurement error or feature tracking errors, and because the match
for each frame is computed independently, the results can be "noisy",
particularly if field of view is estimated. In match-move situations where the
real camera performs smooth moves, it might be useful to filter the match
results to eliminate this noise.
You use the Move Smoothing rollout to control and perform these smoothing
operations after a match has been created.
Camera Tracker Utility | 3845