2009

Envelope Graph group
Displays a representation of the amplitude curve over time.
Envelope Parameters group
Specifies the time over which the envelope of the action takes effect, relative
to the key pressing and release.
Attack Displays the time it takes after pressing the key for the value to reach
its maximum level.
Decay Displays the time it takes after having reached maximum for the value
to fall to that specified by the Sustain spinner.
Sustain After the Attack and Decay, the value specified here is sustained until
you release the key.
Release After releasing the key, this is the time it takes for the value to fade
out to zero.
Parameter Scaling Area Sets the scale of the envelope and the range of the
output value.
Time Specifies the scale of the Attack, Decay, and Release parameters. The
value represents the number of seconds contained in 1 unit. For example, if
this value is 1.0, then an Attack value of 1.0 equals 1 second.
Range Sets the maximum output value of the controller.
NOTE This controller ignores the state of the Ctrl, Alt, and Shift keys.
TIP Because a single keyboard key can only generate either a positive or negative
value, if you want to control both directions of a Bend Angle, for example, use a
List controller. First, make sure there's a standard controller (such as a Bezier
controller) assigned first in the list to maintain the center position. Then add two
Keyboard Motion Capture controllers to the list (one assigned to one key, and the
other assigned to a different key.) Set the range of one to the positive extent and
the range of the other to the negative extent.
Joystick Input Device rollout
The Joystick Input Device driver was designed for the Microsoft Sidewinder
joystick, which contains more controls than the standard joystick. You can
use this device driver for standard joysticks as well.
Motion Capture Utility | 3811