2009

Record Controls group
Tests and records your animation. The first three buttons let you control the
recording directly, while the Start/Stop button lets you use a MIDI device to
control the recording.
Start Starts a recording using the values set under Record Range below the
Track list.
Stop Stops the recording before the Out frame is reached. You can also stop
a recording by pressing Esc, or by pressing the right mouse button.
Test Tests your motion. No recording takes place. Exit by clicking Test again,
pressing Esc, or clicking the right mouse button.
Play During Test When turned on, and you click Test, the animation in the
scene plays in a loop while you test your motion. Note that tracks in the
Motion Capture list that are selected (marked red) won’t play back because
they're waiting for input from the assigned peripheral device.
Start/Stop Displays the
Start/Stop Trigger Setup dialog on page 3806. You can
choose the type of MIDI device that will control the recording.
Enable Uses the assigned MIDI device for recording instead of the Start, Stop,
and Test buttons.
TIP In the Time Configuration dialog, you can reduce the viewport playback speed,
test or record at the lower speed, and then reset the speed to normal to view the
results.
Motion Capture Utility | 3805