2009

■ Enforce IK Constraints When a transition occurs between two clips where
the same foot or feet are planted with footsteps or planted keys, this option
forces the foot/feet to stay planted during the transition. Default=On.
■ Continuity Range Sets an additional transition time after the actual
transition, giving the foot time to get from its planted position to its
keyframed location in the next clip. Range=0 to 100; Default=6.
■ Filter Hyper–Extended Legs Prevents a leg from straightening during a
transition. This can occur when the COM moves in such a way that the
foot can't reach its planted position unless the leg goes completely straight.
This option corrects the problem by raising the biped's heel off the ground
so the knee can bend. Default=On.
■ Max Knee Angle Sets the maximum angle that can be reached between
the thigh and calf before the heel comes off the ground. An angle of
180 indicates a perfectly straight leg. A value of 160 or 170 indicates a
slightly bent leg.
Mixer Rollout
Select a biped. > Motion panel > Biped rollout > Mixer Mode
On this rollout, you can load and save
MIX files (Motion Mixer files) on page
8045 . A saved MIX file can be loaded onto any biped in the scene, and motions
in the mix will be automatically adapted to the biped's size.
The Mixer rollout appears when Mixer Mode is turned on from the
Biped rollout.
Interface
3794 | Chapter 15 Animation