2009

Procedures
To adjust balance using the balance track:
1 Add a biped to the Mixer, and create at least two trackgroups for the
biped. See
Filtering Mixer Tracks on page 3715.
2 Filter one trackgroup to use motion only from the spine, arms and head.
See Filtering Mixer Tracks on page 3715. This trackgroup will hold the upper
body motion.
3 Filter a different trackgroup to apply only to the legs, pelvis and COM
tracks. This trackgroup will hold the lower body motion.
4 Add a clip with a great deal of upper body motion to the upper body
track. See
Importing Clips to the Mixer on page 3708.
5 Add a clip with very different lower body motion to the lower body track.
6
Click the Balance Weight Mode button at the far right of the balance
track.
The weight curve becomes visible at the top of the balance track.
TIP If you can't see the weight curve, click Preferences to display the Mixer
Preferences dialog, and turn on Weight Curves.
7 Add nodes to the weight curve, and adjust the nodes. For information
on how to add nodes and edit weight curves, see
Adjusting Track Weight
on page 3730.
Using the Motion Mixer | 3739