2009

The lengths of the dashed lines change to indicate the new timing. Where
lines are shorter, the motion will play faster. Where lines are longer, the
motion will slow down.
9 Select and move the bottom bar to change the original time.
Either bar can be moved to change the effect of the time warp. The length
of separation between the two bars sets the degree of time-warping that
will occur. When both bars are aligned, no warping occurs.
To add multiple time warps to a clip:
1 You can time-warp other parts of the clip by adding more time-warp bars
with the arrow cursor, then moving the new top bars. When you add a
second time warp bar after editing the first, the top bar appears where
you click, but the bottom bar appears in a different location. The bottom
bar's location corresponds to the original time of the top bar before the
clip was time-warped.
NOTE You cannot move one time warp's top bar past another on the clip.
3736 | Chapter 15 Animation