2009

5 Move the cursor over the clip's horizontal center line until an arrow cursor
appears.
6 At the approximate original time, click the clip to set a time warp bar.
A time warp bar actually consists of two parts, a top and a bottom.
7 Click the top half the bar. The top half turns white to indicate it is
selected.
8 Drag the top half of the bar to the left or right to set it to the warped time
noted in step 3 of the previous procedure. This will cause the motion at
the original time to occur at the warped time.
TIP As you drag the top bar, watch the Frame value at the top of the Motion
Mixer window to see the top bar's new frame number.
Using the Motion Mixer | 3735