2008

Splines rendered at thickness of 1.0 and 5.0, respectively
Sides Sets the number of sides (or facets) for the spline mesh n the viewport
or renderer. For example, a value of 4 results in a square cross-section.
Angle Adjusts the rotational position of the cross-section in the viewport or
renderer. For example, if the spline mesh has a square cross section you can
use Angle to position a "flat" side down.
Rectangular Displays the spline's mesh shape as a rectangle.
Length Specifies the size of the cross–section along the local Y axis.
Width Specifies the size of the cross–section along the local X axis.
Angle Adjusts the rotational position of the cross-section in the viewport or
renderer. For example, if you have a square cross-section you can use Angle
to position a "flat" side down.
Aspect Sets the aspect ratio for rectangular cross-sections. The Lock check
box lets you lock the aspect ratio. When Lock is turned on, Width is locked
to Length that results in a constant ratio of Width to Length.
New Settings Preset Dialog
File menu > File Link Manager > Presets panel > Copy or New
Utilities panel > Utilities rollout > More button > File Link Manager > Presets
panel > Copy or New
The New Settings Preset dialog creates a new preset in the
File Link Manager
on page 6783 . The settings of the new preset either use default values (if you
File Link | 6809