2008

you want to simulate a raging fire, you want the fractal patterns to move
upward. This parameter can be
animated on page 6647 .
Direction Specifies the direction, in degrees, of the inferno effect motion.
By default, 0 is aligned in the 12 o'clock position, and works clockwise. This
parameter can be animated.
NOTE The Motion and Direction spinners control the motion of the fractal pattern
in the X and Y directions. You can control the Z direction using the Speed option
under Inferno Parameters.
Quality Specifies the overall quality of the fractal noise patterns in the inferno
effect. Higher values result in more iterations of the fractals, more detail in
the effect, and slightly longer render times. This parameter can be animated.
Reseed The number that the fractal routines use as a starting point. Set this
spinner to any number to create different fractal effects. The Reseed button
randomly selects a new number.
Parameters group
Size Specifies the overall size of the fractal patterns. Smaller numbers produce
small, grainy fractals. Higher numbers produce larger patterns. This option
can be animated.
Speed Sets the overall speed of the turbulence in the fractal patterns as they
are animated. Higher numbers produce faster turbulence in the pattern. This
parameter can be animated.
Base Specifies the brightness of the colors in the inferno effect. Higher values
result in brighter color ranges and brighter infernos. Lower values result in
dark, softer effects. The Base spinner only affects Fiery and Electric inferno
types This parameter can be animated.
Amplitude With the Base spinner, controls the maximum brightness for
each portion of the fractal inferno patterns. Higher values result in fractal
patterns with brighter colors. Lower values result in the same patterns, with
muted colors. This parameter can be animated.
Bias Shifts the colors of the effect toward one end of the color range or the
other. At a setting of 50, Bias has no effect. Above 50, the colors are brighter,
and below 50, they are darker and softer. This parameter can be animated.
Edge Controls the contrast between the light and dark areas of the fractal
patterns. High values produce a high contrast and more well-defined fractal
patterns. Low values result in less defined, subtler effects. This parameter can
be animated.
Lens Effects Filters | 6669