2008

also ensures that the stars maintain their relative position to the flare as it is
being animated.
Hue Specifies the gradation of the color of the streak. This parameter can be
animated.
Sharp Specifies the overall sharpness of the streak. Higher numbers produce
crisp, clean, and clear streaks. Lower numbers produce more of a secondary
glow look. Valid values are from 0 to 10. This parameter can be animated.
Taper Controls the taper of the individual spokes of the streak. Taper widens
or narrows the tips of the individual streak points. Low numbers create a sharp
point, while high numbers flare the points. Default = 0. This parameter can
be animated.
Gradients The
gradients on page 6699 are the same for the Streak effect as
for others, except for two gradients: Section Color and Section Transparency.
These options are useful when you want to create a "soft" look to the streak
spokes. Both gradients work from the center of each spoke to the outer edge
of the spoke.
Flare Inferno Parameters
Rendering menu > Video Post > Video Post toolbar > Add Image Filter Event
> Choose Lens Effects Flare from Filter Plug-In list. > Setup > Inferno tab
Infernos let you use lens flare to create explosions, fire, and smoke effects and
add a bit of fractal noise to any part of the lens flare. This noise comes in three
types: Gaseous, Electric, and Fiery.
Lens Effects Filters | 6667