2008

Setup Displays a setup dialog specific to the plug-in. Some plug-ins might
not use this button.
Video Post Parameters group
VP Start Time/End Time Sets the starting and ending frames for the selected
event within the overall Video Post queue. Video Post renders the event over
the number of frames specified here.
Enabled Enables or disables the event. When this box is off, the event is
disabled and Video Post ignores it when rendering the queue. Each event must
be disabled individually. For example, disabling a composite layer event does
not disable the composited image events. The range bars of disabled events
are unavailable in the event track area.
Image Input Options
Rendering menu > Video Post > Video Post window > Make sure no events
are selected in the queue. > Video Post toolbar > Add Image Input Event >
Select a file for input. > Options
The Image Input Options dialog contains controls for setting the image's size
and placement relative to the frames of video output. For animated input,
you also use it to synchronize the Image Input event with the frame sequence
of video output. The same dialog appears when you click Options from the
Mask area of the Filter Event and Layer Event dialogs.
Procedures
To align the input image, do one of the following in the Image Input Options
dialog:
1 Choose Presets and then click one of the preset alignment buttons.
2 Choose Coordinates and then enter the X,Y coordinates for the image's
location.
The upper-left corner is (0,0) for both the input image and the output
frame. Increasing X moves the image to the right, and increasing Y moves
the image down. Negative values move the image in the opposite
direction. X and Y values specify pixels.
Image Input Options | 6617