2008
Section Color group
Section Color determines the color of the effect by using three different color
swatches that are matched to the three sections of the effect. A map can also
be used to determine section color.
Mix Mixes colors set in Radial Color and colors set in Section Color. Setting
the spinner at 0 will only use values set in Radial Color while setting the
spinner at 100 will only use values set in Section Color. Any value between 0
and 100 will mix between the two values.
Falloff Curve Displays the
Circular Falloff dialog on page 6450 in which you
can set weights for the colors used in Section Color. By manipulating the
Falloff Curve you can make the effect use more of one color or map than
another. You can also use a map to determine the falloff when a light is used
as a Lens Effects source.
Radial Size group
Determines the radial size around the particular Lens Effect. Clicking the Size
Curve button displays the
Radial Size dialog on page 6458 . Using the Radial
Size dialog you can create points on a line and move those points along a
graph to determine where the effect should be placed around the light or
object. You can also use a map to determine where the effect should be placed.
A check box is used to activate the map.
6446 | Chapter 19 Effects and Environments