2008

■ E - 44 x 34 in. (at 75 dpi)
■ A0 - 1189 x 841 mm (at 75 dpi)
■ A1 - 841 x 594 mm (at 100 dpi)
■ A2 - 594 x 420 mm (at 150 dpi)
■ A3 - 420 x 297 mm (at 200 dpi)
■ A4 - 297 x 210 mm (at 300 dpi)
■ A5 - 210 x 148 mm (at 300 dpi)
■ Letter (11 x 8.5 in. at 300 dpi)
■ Legal (14 x 8.5 in. at 300 dpi)
■ Tabloid (17 x 11 in. at 300 dpi)
TIP You can customize the Paper Size list by editing the file plugcfg\printwiz.ini
. If you choose to edit the file, first be sure to save a backup copy of the original.
Portrait/Landscape Choose Portrait for vertically oriented output or
Landscape for horizontal output. The window image provides a graphic
depiction of the orientation.
NOTE Changing between Portrait and Landscape simply switches the Width and
Height settings. The actual orientation depends on the image dimensions. For
example, if you choose Portrait, and then specify a custom size whose width is
greater than its height, the resulting orientation will be horizontal.
TIP After changing this setting, be sure to preview the image using the Show
Safe Frame
on page 7377 function from the viewport right-click menu. This shows
how the output orientation corresponds to the viewport.
Choose Unit Lets you specify whether the measurement units for Paper
Width and Paper Height are in millimeters (mm) or inches.
Choose DPI Value Provides four buttons for commonly used dots-per-inch
settings: 72, 150, 300, and 600. Click one to set it in the DPI property, below.
Paper Width/Height Specifies the output width and height in mm
(millimeters) or inches, depending on which is chosen under Choose Unit.
NOTE Changing either setting also changes the corresponding Image size setting.
Print Size Wizard | 5927