2008

in place, but the services operate under Windows 2000 or XP instead of in a
separate process.
You can run the Manager and Server as services directly from a Command
Prompt window or the Run dialog using the -i switch (install as a service).
Then go to Services and start the Manager and/or Server, or reboot.
To remove the Manager or Server once it has been installed as a service, you
must run the program directly from a Command Prompt window or the Run
dialog using the -r switch (remove service).
See also:
■
Creating a Special User Account on page 6270
Procedures
To set up the Manager as a service:
1 Go to the machine on which you will install the Manager as a service.
2 Open a Command Prompt window and change the directory to the
program’s root directory (for example, \Program Files\Autodesk\Backburner\.
3 Type managersvc -i
The following message should be displayed:
Backburner Manager ... Service Installed
4 Go to Windows Control Panel > Administrative Tools > Services,
right-click Backburner Manager, and choose Start.
If you choose Properties from the right-click menu, you can also set users,
passwords, and other parameters.
To set up the Server as a service:
1 Go to the machine on which you will install the Server as a service.
2 Open a Command Prompt window and change the directory to the
Backburner root directory.
3 Type serversvc -i
The following message should be displayed:
Backburner Server ... Service Installed
Manager and Server | 6303