2008

Interface
Output Resolution This read-only field displays the horizontal and vertical
resolution of the final image, in pixels.
Strip Height Sets the height of each horizontal strip in pixels or as a
percentage of the total height. Default=10 percent of the total image height,
in pixels.
This setting is interdependent with and inversely proportional to the Number
Of Strips setting; increase one, and the software decreases the other.
Number of Strips Sets the number of horizontal strips to be rendered by the
available servers. Default=10.
The value determines the maximum number of machines to which the job
can be farmed out. For example, if you use the default setting of 10 strips, the
job can be performed by 10 machines at most. In that case, assuming equal
performance of all 10, rendering would take approximately one-tenth the
time required by one machine.
Network Job Assignment Dialog | 6295