2008
Procedures
To create a new user (Windows 2000 and XP):
1 From the Start menu, select Settings > Control Panel > Administrative
Tools > Computer Management.
2 In the Computer Management dialog, go to System Tools > Local Users
and Groups > Users.
3 In the right-hand pane, right click in a blank area and choose New User
to display the New User dialog. If the New User option is unavailable,
you don't have the required administrative privileges.
4 In the New User dialog, do the following:
■ Enter a user name for the new account in the Username text box. This
can be any name, but it should be the same across all network
rendering machines.
■ Enter a password for the new account in the Password and Confirm
Password boxes. Like the user name, this password needs to be the
same for all rendering servers.
■ Turn off “User Must Change Password At Next Logon” and turn on
“Password Never Expires”.
This will bypass errors when you assign this special user account to
the rendering service.
■ Click Create to create the new user and password.
When the network is part of a domain it is a good idea to have your
network administrator create a special user account on the domain.
This user account would have read/write access to the network servers
where maps, xrefs and frames are stored.
■ Click Close.
5 Do not close Administrative Tools.
To assign a user to a rendering service (Windows 2000 and XP):
Do the following on every computer used as a rendering server:
1 Make sure each server system is set up with the
Network Rendering Server
on page 6315 running as a service.
2 From the Administrative Tools windows, choose Services to display the
Services dialog.
System Setup | 6271