2008

To move or clone keys on the track bar:
While keys are moved or cloned, small lines on the track bar mark the original
position of the keys. All keys at a particular frame are moved simultaneously
using the following procedures.
1 Drag a key selection to move it in time.
2 Hold down Shift, then drag a key(s) to clone keys.
3 Right-click to abort a move or clone operation.
To move a single key from a frame with multiple keys:
If, for example, a frame has both a transform key and a material key for the
selected object, and only the transform key must move, display the Transform
Properties dialog and use the Time parameter to move the transform key.
1 Right-click a key on the track bar and choose a key on the pop-up window
key list.
A Key Properties dialog is displayed.
2 Change the Time parameter in the Key Properties dialog.
The key slides along the track bar to a new location.
To delete keys on the track bar:
1 Make a key selection on the track bar and press Delete.
All selected keys are deleted.
2 Make a key selection on the track bar, right-click anywhere on the track
bar to display the track bar menu, and then choose Delete Selected Keys
on the pop-up window.
All selected keys are deleted.
To delete a single key type on a frame with multiple keys:
An object can have many keys for different animated parameters at a particular
frame. Use this procedure to delete a key for a single parameter.
1 Right-click over a selected or unselected key on the track bar.
A pop-up window displays.
2 Move the mouse over Delete Key, then choose a key to delete in the
submenu.
7318 | Chapter 23 User Interface