2008

None When this is chosen, link relationships will not appear in the
Schematic View display.
Grid group
This group controls the display and use of a grid in the Schematic View.
Show Grid Displays a grid in the background of the Schematic View window.
Snap to Grid When this is on, all moved entities and children of those
entities will snap their upper left corners to the nearest grid point. Entities
not snapped to a grid point when snap is enabled will not snap until they are
subsequently moved.
Grid Spacing: Sets the spacing units of the Schematic View grid. This uses
the standard that entities are 20 grid units high and 100 grid units long.
Arrange Method group
Arranging always takes place within the confines of the positive X and negative
Y space which is delineated by the darker grid lines.
Stacked When this is turned on, arranging via Always Arrange, Arrange
Children or Arrange Selected will result in the hierarchies being stacked below
a width that is determined by the extents of the highest entities in the view.
Horizontal When this is turned on arranging using Always Arrange, Arrange
Children or Arrange Selected will result in the hierarchies being distributed
along and below the y=0 line. Arranging always takes place within the confines
of the positive X and negative Y space.
Vertical When this is turned on arranging using Always Arrange, Arrange
Children or Arrange Selected will result in the hierarchies being distributed
along and to the right of the x=0 line. Arranging always takes place within
the confines of the positive X and negative Y space.
Sync Selection group
Viewports When this is chosen, node entities selected in Schematic View
will have their corresponding nodes selected in the viewports. Likewise, nodes
Schematic View Preferences Dialog | 7211