2008

Base Objects Turns on and off the display of the base objects. Use this to
remove clutter in the Schematic View window.
Modifier Stack Turns on and off the display of modifier nodes.
Materials/Maps Turns on and off the display of material nodes in the
Schematic View window. Hide the materials when you are animating and
don’t need to see them, display them when you want to select materials or
make changes to the material of various objects.
NOTE Schematic View does not support the ability to manipulate maps. You can
not paste a map from one material to another.
Controllers When this is turned on, controller data is included in the display.
When this is turned off Controllers, Constraints and Param Wires relationship
and entity buttons are unavailable in the Display floater. When this is on,
you can assign controllers or wire parameters using the tools quad of the
Schematic View right-click menu.
Static Values When this is turned on, unanimated scene parameters are
included in the Schematic View display. Turn this off to prevent the window
from filling up with everything seen in Track View.
Master Point Controller When this is on, sub-object animation controllers
are included in the Schematic View display. This button prevents the window
from filling up with too many controllers in cases in which sub–object
animation is present.
Skin Details When this is turned on four controllers for each bone in the
Skin modifier are included in the Schematic View display (when Modifiers
and Controllers are also included). This button prevents the window from
stretching out around too many Skin controllers with normal use of the Skin
modifier.
Include Only group
Selected Objects Filters the display of selected objects. Check this box if you
have a lot of objects and only want Schematic View to display the viewport
selection.
Visible Objects Limits the display in Schematic View to the visible objects.
Hide objects you don’t need to display, then check this box to contain clutter
in Schematic View.
Animated Objects When this is turned on, then only objects that have keys
and their parents will be included in the Schematic View display.
Schematic View Preferences Dialog | 7209