2008

Sphere/Point Choose between creating spheres or point helpers to illustrate
markers.
Size Sets the sphere diameter or point size, based on your choice above.
Time Options group
All/Range Choose between using the entire animation range from the motion
capture file, or a defined portion.
To/From These values represent the start and end frames of the defined
range. Only available if Range is active.
Offset Sets the number of inserted empty frames before the imported
animation starts.
Set Frame Rate When on, the
frame rate on page 7791 from the TRC file
overwrites the current one in the
Time Configuration dialog on page 7359 .
Scale group
Global Sets the size of the resulting skeleton.
NOTE The scale value within 3ds Max remains 100.
Ok Proceeds with TRC import, using the current settings.
Cancel Cancels TRC import.
Exporting HTR/HTR2 Files
File menu > Export > Motion Analysis HTR File (*.HTR)
The Motion Analysis HTR (Hierarchical Translation-Rotation) motion capture
file format is an alternative to the
BVH on page 7726 format because it provides
flexibility in data types and ordering. It also has a complete base pose
specification, which consists of indicating the starting point for both rotations
and translations.
The stored data is grouped by segments; all motions from the first segment
are read, then those from the next segment, and so on.
The HTR format contains four sections: Header, Segment Names & Hierarchy,
Base Position, and the motion data section.
7058 | Chapter 21 Managing Scenes and Projects