2008

Enable In Viewport When on, the shape is displayed in the viewport as a
3D mesh using the Radial or Rectangular parameters set for Renderer.
Use Viewport settings Lets you set different rendering parameters, and
displays the mesh generated by the Viewport settings. Available only when
Enable in Viewport is turned on.
Generate Mapping Coords Turn this on to apply mapping coordinates.
Default=off.
3ds Max generates the mapping coordinates in the U and V dimensions. The
U coordinate wraps once around the spline; the V coordinate is mapped once
along its length. Tiling is achieved using the Tiling parameters in the applied
material. For more information, see
Mapping Coordinates on page 5183 .
Real-World Map Size Controls the scaling method used for texture mapped
materials that are applied to the object. The scaling values are controlled by
the Use Real-World Scale settings found in the applied material's
Coordinates
rollout
on page 5620 . Default=on.
Auto Smooth If Auto Smooth is turned on, the spline is automatically
smoothed using the threshold specified by the Threshold setting below it.
Auto Smooth sets the smoothing based on the angle between spline segments.
Any two adjacent segments are put in the same smoothing group if the angle
between them is less than the threshold angle.
Threshold Specifies the threshold angle for smoothing, in degrees. Any two
adjacent spline segments are put in the same smoothing group if the angle
between them is less than the threshold angle.
Viewport Choose this to specify Radial or Rectangular parameters for the
shape as it will display in the viewport. Available only when Enable in Viewport
and Use Viewport Settings are on.
Renderer Choose this to specify Radial or Rectangular parameters for the
shape as it will display when rendered or viewed in the viewport when Enable
in Viewport is turned on.
Radial Displays the 3D mesh as a cylindrical object.
Thickness Specifies the diameter of the viewport or rendered spline mesh.
Default=1.0. Range=0.0 to 100,000,000.0.
AutoCAD (DWG) Files | 6997