9

Copy Biped Animation to Clip Dialog 635
Remove Weights—
Removes any existing weight
cur ves from clips selected to be replaced.
Remove Warps—Removes any existing time warps
from clips selected to be replaced.
Cop y Bip ed An imation to Clip
Dia log
Select a biped. > Motion panel > Biped Apps rollout >
Mixer > Motion Mixer menu bar > Clips > Load Source >
From Biped
The Copy Biped A nimation To Clip dialog opens
when you select one or more clips on a track and
choose Load Source > From Biped on the Clips
menu (page 2–632) The animation from the biped
replaces the selected clips.
Note: This dialog is available only for biped object
mixes.
Inter face
Copy Animation Into:—
• The sel ected clips only —Only the selected clip in
the track is replaced by a new clip chosen from
the reservoir.
•
All inst ances—Replaces instances (page 3–958)
of the clip (an y occurrence of the selected clip
within tracks for the same biped, or other
bipedsofthesamesize)withtheclipselected
from the Reservoir.
•
All instances and adaptations—Replaces any
occurrence (adaptation (page 3–905))ofthe
selected clip on al l bipeds’ tracks in the Mixer,
w ith the clip selected from t he Reservoir.
Method to Fit A nimation to Clip:—
• Scale animation to fit clip—Scales the length of
the loaded clip to m atch the length of the clip it
replaces in the track.
•
Trim animation to fit clip—Tr ims the length of
the loaded clip to m atch the length of the clip it
replaces in the track.
•
Set clip length to animation length, shifting
remaining clips in time—
For selected clips,
changes the animation length to the loaded clip
length. All clips on the track after the selected
clip are shifted depending on the length of the
newly loaded clip.
Remove Weights—Removes any existing weight
curves from clips selected to be replaced.
Remove Warps—Removes any existing time warps
(page 2–620) from clips selected to be replaced.
Reser voir File Groups Dialog
Select a biped. > M otion panel > Biped Apps rollout >
Mixer > Mo tion M i xer menu bar > Clips > Load S ource >
From Reservoir...
Graph Editors menu > Motion Mixer... > Select a
non-biped object track > Motion Mixer menu bar > Clips
> Load S ource > From Reservoir...
The Reservoir File Groups dialog opens when
you select clips and choose L oad Source > From
Reservoir on the Clips menu (page 2–632).This
action replaces selected clips with the clip you
choose from the Reservoir. This dialog shows a list
of al l the clips in the Reservoir (page 2–649).