9

Motion Capture Controller 351
Note:
The items in this group are only available
when Accumulate is selected in the Joystick Axis
group.
Controller—Assigns a Rotation Motion Capture
controller where the direction will be derived.
Typically, this would be the Rotat ion cont roller of
the camera you’re moving.
Note: You can only use a Rotation Motion Capture
controller here.
Cle ar —Removes the assig ned controller.
Direction X/Y/Z—Specifies the local axis that will
be used as the direction. For a Free C amera, for
example, this would be Z, because the camera
points in the Z direction. However, if you had a car
that pointed along its Y axis, you’d use Y.
Component X/Y/Z—Specifies which edit binding
to use. Match this to the Edit Binding button in
the Device Bindings group. For example, if the
Y Edit Binding button is selected, choose the Y
Component option.
MIDI Device rollout
MIDI Channel group
This group contains 16 buttons. You can assign a
channel to your MIDI device.
MIDI Trigger group
Here, you define the type of MIDI event (message)
that will drive the motion. There are four options;
N ote, Velocity, Pitch Bend and MIDI controller.
Note: Turn on to let the note number or pitch
define the output value. The value is deriv ed
from where the note falls within the Note Ra nge,
specified in the group below. When the note is
at the b ottom of the ra nge, the value takes on