8

Customizing Transitions 885
To load Motion Flow Editor f iles:
1.
Select a biped.
2. Open the Motion panel.
3. On the Biped rollout, click Motion Flow
mode .
4. On the Motion Flow rollout, click Load
File.
TheOpendialogisdisplayed.
5. Na vigate to the folder where your .mfe files are
stored.
6. Choose the file to load.
7. Click the Play Animation button to see the
biped move to the scripted clips.
To append Motion Flow Editor f iles:
1.
Select a biped.
2. Open the Motion panel.
3. On the Biped rollout, click Motion
Flow mode .
4. On the Motion Flow rollout, click Load
File .
TheOpendialogisdisplayed.
5. Select a .mfe file from the folder where your
Motion Flow Editor files are stored.
6. Click Append File.
The Open dialog is displayed again.
7. Cho ose a different .mfe file.
A new script appears i n the script drop–down
list and the appended sequence of clips appears
directly below the original sequence of clips
in the Motion Flow Graph dialog, so you may
have to scroll down to see it.
Customizing Tr ansitions
Select a biped. > Motion panel > Biped rollout > Motion
Flow Mode > Motion Flow rollout
A good transition links two clips together
seamlessly, the motion through the transition
should appear natural, as though the motion was
captured as one long motion sequence. If clips do