8

Filters Panel 877
Blurring, Smoothing, and Boosting parameters
Width— Width is the size of the filter kernel width
in frames. It tells y ou how much of the animation
istakenintoeffectwhenfilteringaspecified
keyframe.
Dampi ng—The Damping value changes how
effective the filter should be. A higher value, the
more dramatic the change. A damping va lue of 1.0
is normal filter behavior
Sub A nim parameters
Enable—Turns Position, Rotation, and Scale
subanimsonandofffortheselectedbipedparts.
Collapse—Adds the subanim animation of the
selectedbipedparttothatpart’sTransform
controller.
Note: When you choose the Sub Anims filter, t he
Filter button at the bottom of the panel disappears.
That’s because the operations of this filter are
immediate.
Don’t Delete—Maintains the subanim in the list as
it’s collapsed on to the biped.
Per Fr ame—Sets keys at every frame of the
collapsed con troller.
The Sub Anims filter tools are also available from
theMotionpanel. Youcanassigncontrollers
to a biped subanim, and then collapse it by
right-clicking and choosing Properties. The
difference between using this in the Motion p anel
and in the Workbench is that you can apply
subanims to multiple biped objects in one step
when using the Workbench filter.
Key Reducer parameters
Create K ey Per Frame—When on, the filter creates a
key per frame for every selected tr ack. Default=off.
Tolerance—Sets the maximum angular or
positional deviation for a track (other than a COM
track). Default=3.0.
Values are in units of translation for position
tracks, and in degrees for rotation tracks.
Key Spacing—Sets the minimum number of f rames
between keys (other than COM keys).
Tolerance is computed first, then Minimum Key
Spacing computes further key reduction.
COM Parameters—These Tolerance and Key
Spacing sett ings affect key reduc tion only
on specified center-of-mass (COM) tracks
(horizontal, vertical, or rotational).
Filter——Click to apply the active filter to the
selected tracks.