8

Analyze Panel 869
Analyze Panel
Select a biped body part. > Motion panel > Biped Apps >
Workbench > Analyze panel
The Analyze panel provides tools to evaluate the
cur ves for the selected biped p arts, and review
them for certa in error conditions. It can spot
spikes and noise in the curves, and locate specific
keyfr a mes t hat are responsible for discontinuous
motion. The errors are displayed as brown lines
over the curves, and are also listed at the bottom of
theAnalyzepanel.YoucanthenusetheFixpanel
to automatically fix errors, or you can fix errors by
manually adjusting keys and curves in Cur ve view.
Brown lines on th e c u rve show the errors.
Procedure
To analyze a curve:
1.
On the Select panel, choose the biped object
whose curve you want to correct.
You can select the object from the Select list, in
a viewport, or from the Controllers hierarch y.
2. Click the Analyze tab, then on the Analyze
panel, choose the analyzer you want to use
from the drop-down list.
By default, there are two choices: Noise
Detector and Spike Detector.
3. If you chose Noise D etec tor, choose the
appropriate Property from the Property
drop-down list.
4. Click Analyze.
Any errors found are displayed in the error
result list at the bottom of t he panel. The errors
also appear in Curve View as brown lines.
5. If no errors are found, try lowering the standard
deviation value or make sure yo u have used
the appropriate property when using the noise
detector. For example, if you have a problem
w ith the rotation of a leg , but you cho o se a Pos
property, that er ror will not be detected.