8

Motion Capture Utility 635
Inter face Record Controls group
Tests and records your animation. The first three
buttons let you control the recording directly,
while the Start/Stop button lets you use a MIDI
device to control the recording.
Start—Star ts a recording using the va lues set under
RecordRangebelowtheTracklist.
Stop—Stops the recording before the Out frame is
reached. You can also stop a recording by pressing
ESC,orbypressingtherightmousebutton.
Test—Tests your motion. N o recording takes
place. Exit by clicking Test again, pressing ESC, or
clicking the right mouse button.
Play During Test—When turned on, and you click
Test,theanimationinthesceneplaysinaloop
while you test your motion. Note that tracks in the
MotionCapturelistthatareselected(markedred)
won’t play back because they’re waiting for input
from the assigned peripheral device.
Start/S top—Displays the Start/Stop Trigger Setup
dialog (p age 2–636)
. You can choose the type of
MIDI device that will control the recording.
Enable—Uses the assigned MIDI device for
recording instead of the Start, Stop, and Test
buttons.
Tip: In the Time Configuration dialog, you can
reduce the viewpor t playback speed, test or record
at the lower speed, and then reset the speed to
normal to view the results.