8

370 Chapter 12: Animation
Base Scale—
Defines the float value or X, Y, and Z
values returned for an amplitude of 0.0.
Target Scale—D efines the float value or X, Y, and Z
values returned for maximum amplitude.
Channel group
With this group you select which channel drives
the controller output value. These options are only
available if y ou have chosen a stereo sound file.
Lef t —Uses the left channel amplitude.
Right—Uses the rig ht channel amplitude.
Mix—Combines the two channels so that the
returned amplitude is the greater va lue of either
channel.
Attach Controls Dialog (B lock
Contro ller)
Main toolbar > Curve Editor (Open) > Global Tracks >
Master Block > Right-click master block track. > Properties
> Load > Select a file. > OK > Attach Controls dialog
GraphEditors>TrackView-CurveEditor>Global
Tracks > Master Block > Right-click master block track. >
Properties > Load > Se lect a file. > OK > Attach Controls
dialog
This dialog is displayed when you click Load in
the
Master Block Parameters dialog (page 2–372) .
Tracks in blocks previously saved can be mapped
to tracks in the current scene.
The Incoming Controls list on the left contains all
the incoming tracks. The Copy To list on the right
contains all the tracks in the current scene that you
will attach to.
Interfa ce
Add—Selectstracksinthecurrentsceneinthe
Track View Pick dialog (page 2–374) .
Add Null—Allows a space to be taken if you don’t
want to use a particular track.
Match by Node—Select tracks on the left that you
want to match. Click Match By Node. Then select
a group of tracks that you want to match to. The
system attempts to match the controls based on
their names.
Delete—Deletes a t rack from the list.
Mov e Up, Mov e D own—Move tracks up and down
to align them before attaching them.
OK —Importsthetracksandclosesthedialog.
Can cel—Cancels the Load operation.