8

Motion Capture Controller 335
Note:
The items in this group are only available
when Accumulate is selected in the Joystick Axis
group.
Controller—Assigns a Rotation Motion Capture
controller where the direction wi l l be derived.
Typically, this would b e the Rotation controller of
the camer a you’re moving.
Note: You can only use a Rotation Motion Capture
controller here.
Cle ar—Removes the assigned cont roller.
Direction X/Y/Z—Specifies the local axis that will
be used as the direction. For a Free Camera, for
example, th is would be Z, because the camera
points in the Z direction. However, if you had a car
that p ointed along its Y axis, you’d use Y.
Component X/Y/Z—Spec ifies which edit binding
to use. Match this to the Edit Binding button in
the Device Bindings group. Fo r example, if the
Y Edit Binding button is selected, choose the Y
Component option.
MIDI Device rollout
MIDI Channel group
This group contains 16 buttons. You can assign a
channel to your MIDI device.
MIDI Trigger group
Here, you define the type of MIDI e vent (message)
that wi ll drive the motion. There are four options;
N ote, Velocity, Pitch Bend and MIDI controller.
Note: Turn on to let the note number or pitch
define the output value. The value is derived
from where the note falls within the Note Range,
specified in the group below. When the note is
at the bottom of the range, the v alue takes on