Datasheet

42 | Tutorial 1 — Create and Trim Entities
You have just created a line, your first computer-drawn entity. Continue
to draw lines until you feel comfortable with the action. When you are
ready, you can create a line that has multiple points.
5 On the Draw menu, click Line ➤ Multiple.
6 In the drawing window, click anywhere to create the startpoint of the line.
Then, click another point in the drawing window to create a second line
point. Continue clicking to create additional points. When you are fin-
ished, right-click to complete the line.
Example of a line produced with the Line Multiple option
Now, use the All-In-One toolbar to create a line. When you click and hold
the Line button on the All-In-One toolbar, you see additional buttons
called toolsets. Hovering over a button displays a tooltip with the name of
the button. When you end the command, the new button is shown on the
toolbar. The last button used is what appears on the toolbar, until a new
button is used.
7 On the All-In-One toolbar, click and hold the Line button.
8 On the toolset, drag the pointer until you locate Line Double, and then
release the mouse button.
9 Click anywhere in the drawing to create the startpoint of the line. Then,
click another point in the drawing window to create a second line point.
Continue clicking to create additional points. When you are finished,
right-click to complete the line.
Example of a line produced with the Line Double option
You may want to clean up your drawing at this point so that you have room
to draw more entities.