Manual

WINCUEPRONEWS USER GUIDE
VERSION 1.30B515 49  QTV 1998
The button on the back of the Multibutton Hand Control switches between whether the
Multibuttons scroll knob or the attached Foot Controls (NB. A Foot Controller may not be
attached) pedal is to control the scrolling. If the button is OUT then the scrolling is controlled
by the Multibuttons scroll knob.
If the button is IN then the scrolling is controlled by the Foot Controls pedal.
Using the Multibutton Hand Control to prompt
The Multibutton Hand Control has twelve buttons and a scroll knob on its right hand side. The
scroll speed is controlled by turning the knob.
The functions of all the buttons on the Multibutton are listed below:
Top row of buttons (left to right):
FWD Change the scroll direction. The scroll direction is indicated by the cue
REV marker on the prompt output. If the cue marker points in towards the story,
you are scrolling forwards.
NEXT Jump the prompt forward to the next story. (an ITEM is a STORY)
ITEM
PREV Jump the prompt back to the previous story.
ITEM
RESET Reset the prompt back to the start of the current story.
ITEM
Middle row of buttons (left to right):
NEXT Same function as NEXT ITEM.
MARKER
PREV Same function as PREV ITEM.
MARKER
RESET Reset the prompt back to the start of the current runorder.
R.O.