User Guide User guide

Section 4: QBox Configuration and Operation

Configuring network connections

Configuring a direct QBox-computer connection

QBox

Installation & Operation

Guide

www.autocue-qtv.com

4. Use the arrow keys to select the Lan0 interface type and press Enter.

NOTE: The image above is for illustrative purposes only. You would highlight the

appropriate connection depending on which type of network port you have

chosen to use.

5. Press the Ctrl and Page Down key to bring up the IPv4 Settings page.

6. Press the Tab key until the Automatic via ZeroConf setting is selected. Then

press the Space bar.

7. Press the Tab key to select the OK button and then press Enter. A message

indicating that the network interface has been restarted is displayed on the original

menu.