User Guide User guide

Section 4: QBox Configuration and Operation

Basic operational checks

Reboot and shutdown

QBox

Installation & Operation

Guide

www.autocue-qtv.com

Configuration task selection interface:

1. Press F8 to access the configuration task selection interface.

2. Press either the Down or the Right arrow key to select the Reboot QBox option.

3. Press Enter.

NOTE: The time taken for a QBox to reboot will vary depending on the number of

active network interfaces that are configured on the device. Even if there is

no physical connection, the operating system may take up to 15 seconds

to check each active interface if the IPv4 setting is set to DHCP.