User Guide User guide

Section 4: QBox Configuration and Operation
QBox operating system
Configure and test the QBox
QBox
Installation & Operation
Guide
Issue #: 090924 ©2003-2009 Autocue Group Ltd
16
www.autocue-qtv.com
The table below lists the recommended QBox display mode and output settings.
If you have a composite monitor you must select either the NTSC or PAL
standard for the display mode.
If you are connecting a VGA monitor check the screen resolutions of your
monitor or prompter and select the appropriate VGA setting.
5. When you have selected your display mode press the Ctrl and Page Down key to
display the Outputs page.
6. Use the Tab key to move through the list and use the Space bar to select the required
output setting.
Signal Standard Monitor Resolution QBox Setting
NTSC N/A 640 x 480 (NTSC Native)
PAL N/A 720 x 576 (PAL Native)
VGA 640 x 480 800 x 600
XGA 1024 x 768 1024 x 768
SXGA 1280 x 1024 1024 x 768
UXGA 1600 x 1200 1024 x 768