User Guide User guide

Section 4: QBox Configuration and Operation

QBox operating system

Configure and test the QBox

QBox

Installation & Operation

Guide

www.autocue-qtv.com

Use the following steps to configure the monitor output settings:

1. Press the F8 key on the QBox keyboard to bring up the configuration menu.

2. Use the Down arrow key to select Configure QBox and then press Enter.

3. Press the Right arrow key to select Display Settings.

Press Enter to view the configuration options for your monitor from which you can

choose the appropriate video output signal.

4. Select the setting for your monitor type and signal standard. Use the Tab key to move

through the list and use the Space bar to select the appropriate setting.