Owner's manual

www.qtv.com

www.autocue.com

Section 7: Troubleshooting and Maintenance

Maintenance

Care and handling advice

MSP20

Assembly and Installation

Guide

7.2.2: Care and handling advice

• Avoid dropping the prompter display unit or any of its individual

components.

• Clean the monitor periodically.

NOTE: Do not use abrasive cleaners or dusters when cleaning the

monitor.

• Do not run the prompter for excessively long periods of time.

This will cause the operation of the backlight panel to

deteriorate, gradually becoming dimmer.

• Do not use in wet weather without a cover.

• Do not expose to sunlight for long periods of time.

• Adjust the mounting bracket to allow clear space between the

glass of the hood and the fully-extended camera lens

- small vibrations may cause scratches

- contact by the lens may break the glass

• Ensure that the prompter display unit is correctly aligned both

horizontally and vertically with the camera

• Ensure that the whole on camera unit is securely fastened and

does not sway from side to side.