Owner's manual

www.qtv.com

www.autocue.com

Section 6: MSP20 Operation

Menu options

Video Settings

MSP20

Assembly and Installation

Guide

6.3.4: Video Settings

These settings are only selectable if a signal is present on an active video channel.

6.3.5: Scaling Adjustment

Scaling Adjustments for the image are set in this menu.

6.3.6: System Settings

Sub-menu Options

Motion Processing Use for optimum motion sharpness

Sharpness Emphasize borders

Film Mode Only use with DVD Input

Noise Reduction Filter for noise reduction

Mpeg Processing Filter for MPEG (This setting cannot be used as add

on board does not exist)

Decoder Settings Settings for video decoder

Sub-menu Options

Scaling Mode Use UP and DOWN keys to select the scaling

modes.

Expand: Image is expanded to the full monitor

screen.

Aspect: Image is shown in its aspect ratio according

to the input signal.

1:1 : Image is shown in its original resolution.

Picture Flip Horizontal or vertical flip of image

Zoom Enlarge image

Hor. Pan Horizontal pan of enlarged Image

Vert. Pan Vertical pan of enlarged Image

Sub-menu Options

OSD Timeout Setting of OSD timeout

OSD Hor. Position Setting of OSD horizontal position

OSD Vert. Position Setting of OSD vertical position

OSD Blend Setting of OSD blend

OSD Orientation OSD Horizontal. OSD Vertical. Flip, OSD Rotate

OSD Language OSD Language (Engl. Deutsch)

Reset to Default Reset to default; all saved settings will be lost!!