Owner's manual

www.qtv.com
23
www.autocue.com
Section 6: MSP20 Operation
Menu options
Input Select
MSP20
Assembly and Installation
Guide
Issue #: 081016 ©2003-2008 Autocue Group Ltd
6.3: Menu options
6.3.1: Input Select
The first option allows you to select a video signal source for your prompter display
unit.
6.3.2: VGA Adjustments
The following are only usable if the VGA Channel is active.
6.3.3: Color Adjustment
The various colour settings for the image can be adjusted using this option.
Sub-menu Options
Main Picture channel VGA
Component Video
Scan inputs Off
On
PIP Mode Off
Picture in Picture
Side by Side
Sub-menu Options
Auto Adjust Use for automatic image adjustment
Clock Set clocks manually
Phase Adjust the focus and clarity of the display
Sharpness Increase image sharpness
Hor.-Position Move the image position horizontally
Ver.-Position Move the image position vertically
Sub-menu Options
Brightness use UP DOWN keys for setting brightness.
Contrast use UP DOWN keys for setting contrast.
Saturation use UP DOWN keys for setting saturation.
Hue use UP DOWN keys for setting hue.
Fleshtone use UP DOWN keys for setting flesh tone
Backlight use UP DOWN keys for setting backlight
brightness.
Auto Color adjustment Auto adjustment of colour
Advanced Setting of Gamma, colour temperature and RGB
colour value.