User’s Manual 0622286705
TABLE OF CONTENTS 1. SAFETY SYMBOLS & PRECAUTIONS..................................................................................... 3 1.1. SAFETY SYMBOLS............................................................................................................. 3 1.2. PRECAUTIONS ................................................................................................................... 3 2. INTRODUCTION..............................................................................................
1. SAFETY SYMBOLS & PRECAUTIONS 1.1. SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Alert electrical hazard. Indicates a prohibited action. Indicates to ground for safety. 1.2.
Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. - Do not place outdoors. - Do not place in the transportation system (ship, aircraft, trains, automobiles, etc. - Do not place in a dusty or humid environment. - Do not place in a location where the steam comes directly on the screen. - Do not place near heat generating devices or a humidifier. - Do not place in an inflammable gas environment.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. - Do not place any objects on the ventilation slots.
2. INTRODUCTION Thank you very much for choosing this monitor. 2.1. - Features VGA,CVBS, S-VIDEO Analog signal input DVI ,SDI Digital signal input Resolutions up to 1920x 1080 Power management system conforms to VESA DPMS standard. Supports DDC1/2B for Plug & Play compatibility. Advanced On Screen Display (OSD) control for picture quality adjustment 2.2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged.
3. CABLE CONNECTION 3.3. Before Connecting Before connecting your monitor to the computer, change the display screen settings (Resolution and frequency) in accordance with the charts below. Note: - The lower display modes like 640x 480, automatically enlarge to the maximum display mode (1920x 1080), and some lines of the characters may become fuzzy.
CVBS cable connection: Plug the BNC signal cable into the connector(CVBS) at the rear of the monitor and the other end of the cable into the connector on the Signal Source. After connecting, secure the connection with the screw-in fasteners. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet. 4. ADJUSTMENT This monitor will not likely require adjustment.
4.2. OSD MENU Adjustments and Settings The following table shows all adjustment and setting menus.
Adjustment Procedure 1. Adjust by sub menu in the OSD Menu. To automatically adjust the clock, phase, screen position and resolution. Note: The Auto sizing function is intended for use on the computer running Windows. It may not work properly when the computer is running on MS-DOS (Not windows) or the background color for the "wall paper" or "desktop" pattern is set to black.
5. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact a dealer. Problems Points to check with Possible Solutions Check that the power cord is correctly connected. If the problem persists, turn off the monitor power for a few minutes, then turn it back on and try again. - When the signal is not inputted correctly, even if the 1. No picture monitor functions properly.
6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. Note: Never use thinner, benzene , alcohol (ethanol , methanol or isopropyl alcohol ) , Abrasive cleaners or other solvents before the solubility, as they may damage the cabinet or LCD screen . Cabinet To remove stains, Use a soft cloth lightly moistened with a mild detergent solution. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.
7.2. D-Sub 15pin Connector Pin Signal Pin Signal Pin Signal 1 Red video 6 Red ground 11 Ground Shorted 2 Green video 7 Green ground 12 Data (SDA) 3 4 Blue video Ground 8 9 Blue ground 5V 13 14 H. Sync V. Sync 5 Gnd 10 Ground Shorted 15 Clock (SCL) 7.3.
8. CAVEAT EMPTOR / GUARANTEE EXCLUSION Claims for defects do not exist in the following cases: - natural wear and tear, and any damage, errors, reduced output or changes in the condition or function of our products that are due to external factors (e.g.
