Specifications

equipment details
154
equipment details
155
thetford casette toilet
C-200 CW & C-200S (MANUAL) AND
C-200CWE & C-200CS (ELECTRIC)
C-200 S/CS: models that are connected to
the vehicle’s water tank.
C-200 CW/CWE: models that have their
own flush-water tank
FEATURES
1. Removable seat and cover.
2. Rotatable bowl.
3. Valvebladehandle:opensandcloses
valve blade.
4. Flush-handleactivatestheushbylifting
and pushing down the handle.
4a C-200 CWE & CS.
Flushbutton:activatesush.
5. Power-supply for the waste-level
indicator:twobatteries,type:Penlite1,5V
AA alkaline.
6. Waste-level indicator: indicates when
holding tank requires emptying.
7. Rotating pour out spout: makes emptying
holding tank easy and convenient.
8. Upper carrying handle
9. Automatic holding tank vent: vents the
holding tank when the tank is inserted
in the toilet. This prevents under- or
overpressure in the holding tank.
10.Valvebladeopener.
11. Sliding cover: closes automatically when
holdingtankistakenout.Guarantees
optimal hygiene.
12.Valve-blade
13.Ventbutton:ventstheholdingtankto
avoid splashing while emptying.
14. Hand grip
15. Access door
16. Waterfill door
4
3
2
1
5
6
78 9
10
11
13
14
16
14
15
4a
12
The extractor hood 524 serves to extract
water vapour from cooking areas in caravans
or campers. The integrated halogen lamps (2)
serve to illuminate the work surface.
The fan and the lighting (2) can be switched
independently via the operating panel (1). At
the same time. The integrated grease filter
(3) prevents the extraction system from being
contaminated from inside.
SAFETY INFORMATION,
Always refer to the user instructions
provided with your motorhome
REPLACING THE LAMPS
Lamptype:max.10W/12Vhalogenwith
UV-Stop
Always switch off the lights before replacing
the lamps! The lamps get very hot during
operation. There is a risk of being burnt. Wait
until the lamp has cooled down.
There is a risk of injury if the lamp is broken.
Remove the remainder of the lamp using
suitable tools only.
REPLACING OR CLEANING THE
GREASE FILTER
Flip the front part of the grease filter
downwards.
Pull it out towards you.
Remove the filter holder
You can now exchange the filter. Fix the new
filter in place with the filter holder. Finally,
reinstall the filter unit in the reverse order.
Always switch off the fan motor before
replacing the grease filter! There is a risk of
injury when reaching inside the running fan.
REPLACING THE GREASE FILTER
To replace the filter, proceed according to
figures 8 & 9.
Flip the front part of the grease filter
downwards.
Pull it out towards you.
Remove the filter holder
You can now exchange the filter. Fix the new
filter in place with the filter holder. Finally,
reinstall the filter unit in the reverse order
extractor hood 524
1
2
3
1 Operating panel
2 Light
3 Filter holder with grease filter