Specifications

electrical systems
64
electrical systems
65
is turned off and then on again. When the
EngineoftheVehicleisstartedtheDisplaywill
sense this and Disable the Charge Switch and
theDisplaywillshowonlyCHARGEandno
batterySymbol,astheAlternatoroftheVehicle
is now charging both batteries.
INTERNALPUMPwhenpressedwillturnonthe
Internal Water Pump and the Symbol will go
from just an outline to a solid Display, when
thepumpisrunningtheSymbolwillash.
LIGHTwhenpressedwillturntheEntryLight
On and the Symbol will have lines underneath
it (this can also be switched by the Key Fob).
The Bell Symbol on the Screen displays whether
the Alarm Clock feature has been activated.
If there is a cross underneath then the Alarm
Clock feature is disabled. To enable it press the
Bell Symbol or go to the Alarm Clock Set Up
Screen. When the Alarm Clock is enabled then
there will be a tick underneath the bell.
Pressing the Clock Area of the Screen will
DisplaytheSYSTEMSSCREEN.
SYSTEMS SCREEN
TheSYSTEMSSCREENdisplaysthevarious
systems that can be monitored on the Motor
Home. These can be accessed by pressing
the corresponding symbol on the Screen. The
Systems Screen will be displayed for 2minutes
approxandthenwillreturntotheONSCREEN
oryoucanreturntotheONSCREENmanually
by pressing the RET symbol of the screen.
HAB pressing the HAB Symbol will display the
HabitationBatteryVoltageandShowswhether
thisisGOOD–OKorLOWbythecolourof
the Screen.
VEHpressingtheVEHSymbolwilldisplaythe
VehicleBatteryVoltageandShowswhether
thisisGOOD–OKorLOWbythecolourof
the Screen.
LIFE pressing the LIFE Symbol will display the
amount life left in the Habitation Battery.
STAT pressing the STAT Symbol will display
whether the Habitation Battery is being
Charged or Discharged.
INTºCpressingtheINTºCSymbolwilldisplay
the Internal Temperature of the Motor Home.
EXTºCpressingtheEXTºCSymbolwilldisplay
the External Temperature.
FRONTpressingtheFRONTLIGHTSymbolwill
switchtheFrontLightCircuiteitherONorOFF
the above shows the Light Circuit switched
ONwhentheLightCircuitisswitchedoffthe
Symbol will just be an outline. This is the same
for the Rear Light Circuit.
FRESH WATER pressing the FRESH WATER
Symbol will display the Fresh Water level in the
tank on the Motor Home.
ALARM CLOCK pressing the Alarm Clock
Symbol will display the Alarm Clock Time
Set Screen.
SETUP pressing the Setup Symbol will display
a further set of symbols used for setting up
various items on the display.
SETUP SCREEN
TheSETUPSCREENdisplaysthevarious
systems that may need setting up on the
display. The Setup Screen will be displayed for
2minutes approx and then will return to the
ONSCREENoryoucanreturntotheSYSTEMS
SCREENmanuallybypressingtheRETsymbol
of the screen.
CLOCK SET pressing the CLOCK SET Symbol
will allow you to adjust the Clock and
Calendar.
KEY FOB pressing the KEY FOB Symbol will
enable more Key Fobs to be programmed to
the display.
SOUNDpressingtheSOUNDSymbolwillallow
the sound of the display to be adjusted.
CAL X pressing the CAL X Symbol will calibrate
the level monitoring systems (please see Level
Screen for further details).
CAL Y pressing the CAL Y Symbol will calibrate
the level monitoring systems (please see Level
Screen for further details).
TANKpressingtheWaterTankSymbolwillturn
ONorOFFtheWaterandWasteAlarms.When
the Alarms are OFF there will be a cross over
the Tank Symbol.
BACKLIGHTpressingtheBACKLIGHTSymbol
allows the colour of the display to be changed.
HABITATION BATTERY VOLTAGE SCREEN
TheHABITATIONBATTERYSCREENdisplays
theVoltageLeveloftheHabitationBatteryand
will show whether the Level is POOR - LOW
–OKorGOOD,thisisdonebythescreen
changing colour.
Below 10 volts Flashing Red Screen = POOR
10 to 11 volts Red Screen = LOW
11 to 12 volts Yellow Screen = OK
12andaboveGreenScreen=GOOD
NOTE:If2HabitationBatteriesarettedthen
when the Screen is pressed from the first
batteryitwilldisplaytheVoltageLevelofthe
Second battery.
The Display will automatically return to the
ONSCREENafter2Minutesapproxoryoucan
returntotheSYSTEMSSCREENbypressing
anywhere on the Screen.
VEHICLE BATTERY VOLTAGE SCREEN
TheVEHICLEBATTERYSCREENdisplaysthe
VoltageLeveloftheVehicleBatteryandwill
show whether the Level is POOR - LOW –
OKorGOOD,thisisdonebythescreen
changing colour.
Below 10 volts Flashing Red Screen = POOR
10 to 11 volts Red Screen = LOW
11 to 12 volts Yellow Screen = OK
12andaboveGreenScreen=GOOD
The Display will automatically return to the
ONSCREENafter2Minutesapproxoryoucan
returntotheSYSTEMSSCREENbypressing
anywhere on the Screen.
HABITATION BATTERY LIFE SCREEN
TheHABITATIONBATTERYLIFESCREENdisplays
the amount of life left in the Habitation Battery
the reading on the side will change as the
battery is discharged from 100% to Low in
increments of 10% also the screen will change
colour and the battery displayed will change so
that when it is low the battery will just be an