Specifications

Logic Independence WIRELESS
A range of optional accessories lets you personalise your expandable system -
(see pages 20 to 23).
Kit L-IW comes
with two
Logic Independence
WIRELESS
main control hubs
Aux 1 • designed for Bike-to-Bike
Aux 2 • designed for Stereo GPS
Aux 3 • designed for Stereo Phone
Power
High Quality and Performance Rider and Passenger Noise Cancelling Headsets
Both rider and passenger can use a bike-to-bike radio connected to either hub via the I-VOX system, providing easy and safe hands free use, without losing
the rider to passenger communications or any other functions. Incoming bike to bike audio (on Aux 1 on either hub) automatically reduces the stereo audio
level on both hubs Aux 4 to 50% to improve speech clarity. When a hubs phone is in use it disables that hubs bike to bike VOX transmit function so that
your phone conversations are not broadcast out to the other bikes, which allows the other bikes to continue with bike to bike communications while you
are on the phone. You can optionally bike power your hub which can then also bike power recommended bike-to-bike radios, plus take advantage of the
optional handlebar remote control, to disable the VOX transmit mode providing rider-to-passenger privacy. You can transmit bike-to-bike messages at any
time by either pressing the press-to-talk (PTT) button, or toggle back to the normal VOX transmit mode. When the phone is in use and disables the VOX
transmit function, the remote control PTT button lets you over-ride this so that you can transmit to other bikes even when on the phone.
Incoming stereo audio on your hub Aux 2 is amplified only to your headset and automatically reduces the stereo music on your hubs Aux 4, by 50%
for improved GPS clarity. Note; you can use some phones via some GPS units, but in most cases you lose the important GPS audio and safety camera
warnings while using the phone through a GPS. This is why we provide separate GPS stereo connectivity and separate phone connectivity to manage
this better for you.
Phones can be connected to each hub using the standard leads* supplied, or via the optional stereo Bluetooth interface, without losing the rider-to-
passenger communications. You can use some phones via some GPS units but see the note in Aux 2 above.
Incoming phone audio on Aux 3 automatically reduces the stereo music on Aux 4 by 100% and bike to bike/GPS audio by 50% to improve phone
conversation. The VOX transmit mode for bike-to-bike is also disabled so that your phone conversations are not broadcast out to other bikes.
* Some
phones may require a hands free adaptor.
Perfectly designed for portable battery use using 3 AA batteries (not included) or optionally bike powered for mile after mile of fuss free use. Either
way you simply get on, plug-in and ride. The system automatically turns on and off via the headsets (when used portable) or via the bikes ignition
(when bike powered). Built-in noise suppression helps to prevent any electrical noise from the bike entering the system. Thermal overload and reverse
polarity protection help to protect your investment and let you enjoy a trouble free long life experience.
When either person speaks, the I-VOX system automatically turns only their microphone on, reduces the stereo music and transmits the bike-to-bike
radio, for safer hands free use. When you stop speaking the microphone automatically turns off and the music gently glides back to its normal level.
High quality, robust, water resistant, connectors and leads are custom designed for easy, safe and comfortable use and quick release in an emergency.
Built to last but also easy to service or replace.
Please see notes about using wireless systems in our instruction manuals or on our website: www.autocom.co.uk
Aux 5 for optional plug-in Single Stereo Bluetooth Module
The single stereo Bluetooth module lets you connect wirelessly to one or two Bluetooth devices, so long as one is using hands free profile (such as
a mobile phone or GPS, etc) and the other uses advanced audio profile (A2DP, such as stereo devices, mp3 players, etc).
The Bluetooth module can be set to have the same effects as incoming audio on either Aux 2 or 3.
*
some phones may require a headset adaptor to suit the standard phone lead 2.5mm plug (available from Autocom and most phone shops)
• Independent, logical mixing and control • For each hub provides seamless integration for all your
audio/communication needs. 5 Aux connections (per wireless hub) plus an optional wireless Bluetooth module and a range
of optional leads lets you customise your system to suit your needs, as and when you want. A mode selector switch lets you
set your hubs independent audio to be shared with the other hub if required.
11
Aux 4 • designed for Stereo Music
Both rider and passenger can independently enjoy their own stereo music using the standard leads supplied, which let you connect to most typical
mp3/iPods etc. Note; these connections can be used for some stereo phones, record out etc.
Rider and passengers speech, plus bike-to-bike audio automatically reduces the stereo music on both hubs Aux 4 by 50% to improve communications.
Your incoming GPS audio on Aux 2 automatically reduces your stereo music on Aux 4 by 50% for improved clarity. Incoming phone audio on your
Aux 3 automatically cuts your stereo music on Aux 4 by 100% for improved phone conversations.