Instruction manual

Aux 2 (GPS)
Aux 1 (Bike-to-bike)
Aux 3 (mobile phone)
Rider’s lead
Aux 4 (Stereo music)
Passenger’s lead
Lower
Higher
Passenger
volume
control
Rider
volume
control
When the arrow pointers face upright the
unit is set to the pre-set standard settings.
Lower
Higher
3
Aux 3 • designed for Stereo Phone
Aux 4 • designed for Stereo Music
A phone can be connected using the standard lead* supplied, or via the optional stereo Bluetooth
interfaces. Incoming phone audio automatically cuts the stereo music on Aux 4 by 100% and reduces
bike-to-bike audio on Aux 1 plus stereo GPS audio on Aux 2 to 50% to improve phone conversation;
while at the same time it also disables the bike-to-bike VOX transmit mode to prevent your phone
conversation been broadcast to other bikes.
*Some phones may require a hands free adaptor.
Aux 5 and Aux 6 for optional plug-in Single or Twin Stereo Bluetooth Module/s
Each of the stereo Bluetooth modules lets you connect wirelessly to one or two Bluetooth devices, so
long as one is using hands free profile (such as a mobile phone or GPS, etc) and the other uses
advanced audio profile (A2DP, such as stereo devices, mp3 players, etc). The twin Bluetooth module
lets you connect to between 1 and 4 Bluetooth devices.
Each Bluetooth module can be independently set to have the same effects as incoming audio on either
Aux 2 or 3.
Optional Passenger Headset
When either person speaks, the VOX system automatically turns the microphones on, reduces the
stereo music and transmits the bike to bike radio, for safer hands free use. When you stop speaking
the microphone/s automatically turn off and the music gently glides back to its normal level. High
quality leads (and optional straight or coiled headset extension leads) are custom designed for easy,
safe and comfortable use. Built to last but also easy to service or replace. Optional neat on-bike rubber
socket holders with water resistant dust caps provide that professional finishing touch.
Rider and passenger speech automatically reduce the stereo music on Aux 4 to 50%. It doesn’t cut
completely just in case you like to sing along. Audio from Aux 1 and 2 also reduces the stereo music
by 50% to improve audio quality, while incoming audio on Aux 3 fully cuts the stereo music for
improved phone conversations.
CONNECTIVITY • LOGICAL MIXING AND CONTROL
Aux 1 • designed for Bike-to-Bike
Rider or passenger’s speech automatically transmits the bike to bike radio, thanks to the VOX providing
easy and safe hands free use. Incoming bike to bike on Aux 1 automatically reduces the audio on Aux
4 to 50% to improve speech clarity. When the phone is in use on Aux 3 it disables the bike to bike VOX
transmit function so that your phone conversations are not broadcast out to the other bikes, which
allows the other bikes to continue with communications while you are on the phone. If you bike power
your hub you can also bike power recommended bike-to-bike radios, plus take advantage of the
optional handlebar remote control, to disable the VOX transmit mode providing privacy for rider-to-
passenger communications, and then transmit bike-to-bike messages at any time by either pressing
the press-to-talk (PTT) button, or toggle back to the normal VOX transmit mode. When the phone is in
use and disables the VOX transmit function, the remote control PTT button lets you over-ride this so
that you can transmit to other bikes even when on the phone.
Aux 2
•
designed for
Stereo GPS
Incoming audio on Aux 2 automatically reduces the stereo music level on Aux 4 to 50% to improve audio
clarity. Note; you can use some phones via some GPS units, but in most cases you lose the important
GPS audio and safety camera warnings while using the phone through a GPS. This is why we provide
separate GPS stereo connectivity and separate phone connectivity to manage this better for you.
A range of optional accessories lets you personalise your expandable system.
Logic Instructions 8/5/09 3:28 pm Page 3