Instruction manual

TROUBLESHOOTING GUIDE
11
Speech volume is too quiet.
G Ensure that you are talking into the beige side of the microphone and it is positioned in the loud spot. See page 5 for
more details.
G Adjust the riders/passengers volume control to increase volume level.
G Ensure speakers are positioned correctly. See page 8 for more details.
Phone/GPS/radar/transceiver volume is too quiet.
G Adjust volume level on audio device such as phone/GPS.
G Ensure speakers are positioned correctly. See page 8 and 9 for more details.
G Adjust the rider’s and/or passenger’s volume control to increase volume level.
Music volume is too quiet.
G Adjust volume level on audio device.
G Adjust the rider’s and/or passenger’s volume control to increase volume level.
G Ensure speakers are positioned correctly. See page 8 for more details.
Music mutes 50% even when I don’t speak.
G Turn the VOX control clockwise
Phone will not auto answer.
G Ensure your phone has this facility.
G Ensure that you have connected the adaptor block properly (if needed).
G Check that the phone is set to auto-answer whilst in headset mode (hands-free).
G Try connecting the adaptor to the phone followed by plugging the lead in.
Problems with bike-to-bike radios
G Ensure that you take turns to speak and that you leave 2 seconds between transmissions. See page 10 for hints and tips.
G Ensure both transceivers are on the same channel and sub-tone.
G Check that the connections on the radio are secure.
G Adjust volume level on transceiver.
G Ensure the microphone is positioned correctly and that you are using the loud spot see page 5.
G If using a press to talk (PTT) check the switch position.
G Ensure that the PTT switch position is central when powering up the system.
Interference whilst the engine is running.
G If you are bike powering an audio device, check that you are using an isolated lead to interface it to the system.
G Unplug all accessories and see if the noise is still audible. If the noise has gone, plug one lead in at a time until the noise
returns. You now know which lead is picking up the noise. It will either need re-routing or it is an incorrect lead.
If you need more help or advice please contact your local Autocom supplier.