Specifications

27
together we’re going places
Dometic RM8555 Refrigerator
12V DC Operation
• Press button ‘1’ several times until the LED
adjacent to ‘battery’ symbol illuminates.
• Use the temperature selection button to adjust the
refrigerator temperature which is indicated on the
LED display.
• If the 12V power source is not available then the
LED adjacent to the battery symbol will flash
indicating that there is a problem with the supply.
230V Mains Operation
• Press button ‘1’ several times until the LED
adjacent to mains symbol illuminates.
• Use the temperature selection button to adjust the
refrigerator temperature which is indicated on the
LED display.
• If the 239V power source is not available then the
LED adjacent to the mains symbol will flash to
indicate that there is a fault with the supply.
Switching Off The Refrigerator
To switch off the refrigerator press and hold button
‘1’ (MODE), the LEDs will go out and the refrigerator
will be fully switched off.
Dometic RM8555 Refrigerator
This refrigerator is designed to be used on 230V,
12V (DC) or LPG. The desired power option can be
selected either manually or automatically via the
control panel on the refrigerator.
Switching On The Refrigerator
Ensure that the valve on the gas cylinder is fully
open and that the isolation valve to the refrigerator is
in the open position. Please familiarise yourself with
the location of these valves before using your vehicle
for the first time.
1 Power On switch / Energy selector switch (MODE)
2 Temperature selection
3 Door opening (only when equipped with electrical
door lock)
4 Indicator LED failure
5 Indicator LED door lock (optional)
6 Indicator-LED / operating mode display
7 Temperature level display
Turning On The Refrigerator
Automatic energy selection
To turn on the refrigerator press button ‘1’ for 3
seconds, the display will show the previously
selected operating mode, e.g. 230 which means
230V. By pressing button ‘1’ again you can change
the operating mode to;
AU – automatic energy selection
230V, 12V, GAS – manual energy selection.
Please note the selected power source must be
available otherwise a fault code will appear on
the display.
Manual energy selection
By pressing button ‘1’ repeatedly turn off the
automatic energy selection mode and will illuminate
the desired energy source in the manual mode,
e.g. ‘GAS’, ‘230’ or ‘12V’.
Setting The Refrigerator Temperature
Pressing button ‘2’ on the control panel will adjust
the temperature of the refrigerator. The minimum
setting is indicated at the bottom of the display,
the highest at the top. Please note that the highest
setting indicates the lowest refrigerator temperature.
Turning Off The Refrigerator
Pressing and holding button ‘1’ will turn off
the refrigerator.
For further detailed instructions contact the full
instruction manual supplied in the information
wallet supplied with your vehicle.
Owners Handbook :
5192 AT Frontier Owners Handbook V4 REPRO NCC_Layout 1 17/10/2011 15:50 Page 27